OEM Kit

Supervision Lite RFTM OEM Kit

Supervision's OEM Development Kit contains the following:

  • Lite RFTM Board
  • USB Board
  • 6010 Antenna with 8" Coax Cable
  • ERNI Cable
  • USB Cable
  • Thumb Drive with all Applications and Drivers

Lite RFTM Board

The Lite RFTM board provides an OEM platform for passive UHF RFID development.  It is a low power, small footprint, full-featured device suitable for embedding into a hand-held PDA or developing into an independent stand-alone module for use in a variety of applications.  

8.1 ELECTRICAL SPECIFICATIONS

8.1.1 RF Interface

RF Output Frequency Range: 860Mhz - 950 Mhz

Transmit Power Range: 50mW (17dBm) - 500mW (27dBM)

Receiver Sensitivity: -85dBm

8.1.2 Communications Interface

Serial Interface Baud Rate: 9600, 19200, 38400, 57600, 115200 baud

Digitial I/O    TTL I/O levels

8.1.3 Power Supply 

Power Supply Voltage: 3.3Vdc - 5.0Vdc

Supply Current: 750mA - 475mA

Current Consumption: Idle = 27mA    Deep Sleep = 700uA

Power Dissipation: Average = 0.8 Watts (30% D.C. @ 5 Volts)     Peak = 2.4 Watts (100% D.C. @ 5 Volts)

8.2 ENVIRONMENTAL SPECIFICATIONS

Operation Temperature Range: -20oC to 50oC (-4oF to -22oF)

Storage Temperature: -40oC to 80oC (40oF to 176oF)

Relative Humidity: 5% to 80% non-condensing

8.3 MECHANICAL SPECIFICATIONS

Size: 1.3 x 1.4 in (33.02 x 35.56 mm)

Weight: 0.25 oz (7g)